JetHP Hair Dryer

Try resetting the the ALCI plug. With hair dryer turned OFF & plugged in, press buttons on plug in this order:
1. Press yellow TEST button
2. Press red RESET button
3. Press yellow TEST button again
4. Press red RESET button again
There will be a clicking sound each time you press the red RESET button.
Turn hair dryer ON.

Check UNLOCK/LOCK button at the back of the hair dryer (below the ON/OFF switch). Push button all the way to left, in UNLOCK setting. With button set to UNLOCK (left), check settings can be changed when hair dryer is turned on.

Hair dryer needs a deep cleaning. Follow these simple steps:
1. Remove air filter grill by twisting it ¼ turn counterclockwise. Remove mesh filter.
2. Clean the removable filters with provided black cleaning brush. If necessary, clean removable filters with warm soapy water. Allow to dry completely before assembling.
3. Use the provided brush to deep clean holes of the inner metal filter.
4. Thoroughly scrub entire surface of inner metal filter. Make sure to go all around to unclog all the holes. Wipe the filter with a clean towel.
5. Activate the self-cleaning function. While hair dryer is plugged in but turned OFF, press & hold the reverse airflow button for 3 seconds. Air will flow backwards from inner metal filter (to remove dust & particles) and will automatically turn off after 15 seconds. When done, return removable mesh filter and turn grill filter in position by twisting ¼ turn clockwise OG logo on grill should face upwards when correctly placed. Turn hair dryer back ON and it should work once again as new.

Decibel levels can vary widely based on the distance from dryer to ear and on the settings used. The readings below is to give some guidance but if comparing with another hair dryer, please keep in mind to compare same settings, usage and distances.
When used by a stylist, on the highest setting (so the loudest), the decibel level for the stylist is 57 DB. When used by a consumer at a typical distance, on the highest setting (so the loudest), the decibel level for the consumer is 68 DB.

We recommend cleaning them daily for professional use and weekly for home use. If the yellow or red CLEAN FILTER light is on, the inner mesh filter IS CLOGGED, even if it appears clean. Fine dust, styling products, oils, and lint can restrict airflow over time. Follow these simple steps to deep clean your hair dryer:

1. Remove air filter grill by twisting it ¼ turn counterclockwise. Remove inner mesh filter.

2. Clean both removable filters with provided black cleaning brush and warm soapy water. Clean until water flows freely through the mesh. Allow to dry completely before assembling.

3. Use the provided brush to deep clean holes of the inner metal filter.

4. Thoroughly scrub entire surface of inner metal filter. Make sure to go all around to unclog all the holes. Wipe the filter with a clean towel.

5. Activate the self-cleaning function. While hair dryer is plugged in but turned OFF, press & hold the reverse airflow button for 3 seconds. Air will flow backwards from inner metal filter (to remove dust & particles) and will automatically turn off after 15 seconds.

When done, return removable mesh filter and turn grill filter in position by twisting ¼ turn clockwise OG logo on grill should face upwards when correctly placed. Turn hair dryer back ON and it should work once again as new

The JetHP cord is 9ft long (the longest allowed by regulation) with a hanging loop.

Yes! The JetHP's temperature-regulated airflow, paired with an ionic generator, dries hair quickly with a healthy glow. Whether you use the concentrator nozzle for sleek blowouts or the diffuser for shiny curls, you can style every hair texture with brilliance.

With 3 heat settings and 3 air flow settings, the JetHP offers endless setting options. However, here are the temperature reading for 3 common setting options (except when using with JetWraps):
High heat / High air => 212°F (100°C)
Medium heat / Medium air => 185°F (85°C)
Low heat / Low air => 149°F (65°C)

No, the JetHP is not dual voltage. It can only be used in other countries which use the same voltage as the USA (110V to 125V).